Who named this winter storm after a cartoon fish?

The reports are not final yet, but I'm sure we moved 30 inches of snow.

This is what we woke to this morning after shoveling twice last night.  This picture is the back deck looking out to the pool.  Swim anyone?  If you can find the pool!  The dark horizontal object just over the railing is an 18" planter.


This picture is the other deck.  The dogs needed to have a place to "do their business" so shoveling came before coffee!  Since we didn't get ANY snow last year, it seems the snow gods wanted to make up for lost precipitation quotas. That grey item is the deck table and chairs under a cover.  That gives one a great perception of the snow's depth.


This will give everyone an idea of the depth of the snow when we began to shovel. The picture on the left is looking out to the road.  That is a car on the right side of the photo covered with the white stuff.  The picture on the left is at the clay studio door opened.  This door was clear of snow last night. 


It also was zero degree F with the wind chill at this hour in the morning.
 These cars and the driveway were cleared of snow at 10:00 PM last night.  This morning, this is what Nemo left us.


After three hours, and a lot of help, we are ready to rock-and-roll.  Of course, there isn't any place to go.  But we are ready in the event someone needs to meet us at a pub to cure cabin fever later this afternoon or tomorrow.


Comments

  1. UnknownFebruary 9, 2013 at 12:10 PM

    It is so beautifu.... the boys and i are way jealous!

    ReplyDelete

Post a Comment

Popular posts from this blog

Pop Up Camper Repair - Part 1 Let's Remove the Roof

Image
Prologue A few years ago I purchased a 1981 Palomino pop-up camper from a 1st grade teacher.  It was an impulse buy.  I know nothing about pop up campers. But now I know I paid a bit too much for the unit.  We have used it for 5 years without much maintenance.  But we still paid too much. The picture above is a few years ago with the camper set up.  It is rough but functional What I knew was that the wood on the roof was a bit sketchy...and when the lift arms cables broke after the season in 2010, it was time to undertake fixing the roof.  Due to a few circumstances beyond my control, I couldn't fix the roof in 2011.  So this May (2012) we began the project. The Roof Repair With the help of reading posts on www.popupportal.com and obsessing about this for a year in my head, I began the process.  The first trick was how to remove the roof.  The external lift arms had to be removed to repair the spring / cable mechanism anyhow. The roof arms are spring loaded.  In the e
Read more

Pop Up Camper Repair-- Part 2--Oh Oh

Image
Once the roof was in the garage, I went to work removing the aluminum channels and skin to find out what I was working with.  OMG!  One side wall was completely gone.  I mean gone.  There was nothing between the two pieces of aluminum but sawdust and rotten fragments of wood.  The ants had had a feast while the camper had been parked for the year. There is a wood frame around the outside of the roof.  The inner core looks like rigid insulation.  This wood frame was also gone on one side and so wet on the back, front and other side, I decided I would remove all of this also.  Actually, I had no choice with the one side, as that was missing as much of the roof wall above it was. Note the orange can of ant spray.  That was my main weapon against the ants that just kept on coming. So this is what I was facing after a day of removing all the metal.  A roof with the rigid insulation sandwiched between the top and bottom pieces of aluminum. This was going to be a bigger pr
Read more

New Wheel

Image
In 1974 I spent $175.00 for a brand new potter's wheel.  It was a lot of money for a college graduate without a high paying job, but I was interested in upgrading from a stand up, homemade treadle wheel that was gifted to me right after high school.  I researched types of wheels.  I looked at buying a kick wheel kit and casting my own fly wheel. But I didn't want to deal with the weight and I was still living in apartments. Creative Industries had the cheapest electric wheel on the market at the time and that tipped the scale. 40+ years later, five relocations and hundreds and hundreds pounds of clay, the wheel looked like this. The wheel has been a real work horse.  The only maintenance I have done on this wheel for the past 40 years is a little cleaning and greasing the wheel bearing's through the zerk fitting. When the photo was taken I was deep into making. There was one problem with this wheel that was a constant; the splash pan.  It was merely a horseshoe shape
Read more